AQD-ST

Process water treatment

sterilAir AQD-ST series of stainless steel process water disinfection equipment offer compact small systems with annular geometry up to six-flame UV-C systems with negative irradiation geometry.

All relevant parts of sterilAir AQD-ST consist of a particularly high-grade stainless steel (WN 1.4404/ 316L), which have been additionally double pickled and passivated to increase the corrosion resistance.

Superior technology
for sterility

Microorganisms find ideal growth conditions within recirculated water or technical fluids. Chemical disinfectants lead to a number of undesirable side effects, such as changes in surface tension of the medium, corrosion, foam and odour.

UV-C treatment of water does not encounter such problems. It is a purely physical process without chemical residues. At the same time, cost-effectiveness of this disinfection method is impressive.

AQD-ST

1

with one emitter for a flow rate
up to 2.500 l/h

AQD-ST

3

with three emitters for a flow rate
up to 10.000 l/h

AQD-ST

6

with six emitters for a flow rate
up to 20.000 l/h

Shatter protection?
That's crystal clear!

sterilAir photoreactors are particularly developed for demanding applications, such as protein accumulated brines. The unit is connected to the existing pipe system via the externally threaded nozzles, fitted on one side and at the bottom of the vessel.

There is also no need to worry about a potential breakage of the inserted UV-C tubes: sterilAir offers an innovative special screw fitting (patent pending) for the use of shatter protected UV-C emitters inside the photoreactor.